Blog
PCB fabrication, PCB assembly, PCB materials, DFM, SMT, HDI, ceramic PCB, and electronics manufacturing guides from QueenEMS.
Verify PCB Supplier UL: How to Check File Scope
Verify PCB supplier UL claims by checking the UL file number, recognized company, product category, laminate scope, mark use, and quote evidence….
V-Score vs Tab Routing Buyers Can Put in an RFQ
V-score vs tab routing should be decided by PCB outline, component clearance, edge quality, assembly stress, labor, and quote evidence….
High Voltage PCB Design Buyers Can Put in an RFQ
High voltage PCB design should define creepage, clearance, CTI, pollution degree, altitude, slots, coating, and RFQ evidence….
PCB Bow Twist Spec Buyers Can Put in an RFQ
A PCB bow twist spec should define measurement method, flatness limits, assembly risk, receiving evidence, and release approval before SMT….
PCB Ionic Cleanliness: ROSE, Ion Chromatography & Limits
Compare PCB ionic cleanliness methods, ROSE limitations, ion chromatography, and the lot-linked evidence needed for an acceptance decision….
How to Read a PCB Microsection Report Before Release
A pcb microsection report helps buyers verify hidden PCB structure, hole wall copper, lamination, and acceptance evidence before release….
OSP PCB Finish: Compare Cost, Shelf Life, Reflow and ENIG
OSP PCB finish decisions should compare cost savings with shelf life, reflow count, solderability evidence, and contact-surface risk….
HVLP Copper Foil PCB Buyers Can Put in an RFQ
HVLP copper foil PCB decisions should match insertion loss, data rate, stackup, laminate choice, impedance evidence, and supplier capability….
PCB Shelf Life Buyers Can Put in a Release Plan
PCB shelf life should be controlled by surface finish, sealed storage, solderability evidence, open-bag handling, and release approval….
PCB Impedance Test Report: How to Check Release Evidence
A pcb impedance test report should tie measured values, coupon evidence, tolerance, stackup revision, and shipment release to the same PCB order….
ENIG Thickness Spec: How to Avoid Finish Disputes
An enig thickness spec should define nickel and gold ranges, XRF evidence, finish function, and release rules before PCB shipment….
How to Choose PCB Thickness: Standard Sizes and Fit
Use a PCB thickness chart in mm and mils, then confirm connector fit, stackup, stiffness, assembly handling, and finished-thickness tolerance….