Quick Turn PCB Assembly — From Files to Boards in Days
Our quick turn PCB assembly service accelerates your product development — from design files to fully assembled, tested boards in as few as 3 days. Upload your Gerber and BOM, and receive production-quality PCBA shipped globally, not in weeks but days.
Standard vs. Quick Turn PCB Assembly — What's the Difference?
Waiting weeks for assembled prototypes delays your entire development cycle. Quick turn PCB assembly compresses timelines without compromising quality, so your team iterates faster and reaches market sooner.
| Parameter | Standard Assembly | Quick Turn Assembly ★ |
|---|---|---|
| Typical Lead Time | 15 – 25 business days | 3 – 7 business days |
| Minimum Order Qty | 50 – 100 pcs | 1 pc (no MOQ) |
| DFM / DFA Review | Available on request | Free — included with every order |
| Component Sourcing | Customer-supplied or standard lead | Turnkey sourcing with expedited channels |
| Engineering Response | 24 – 48 hours | Within 2 hours during business days |
| Best For | Volume production runs | Prototypes, EVT/DVT, pre-launch batches |
Need bare boards first? We also offer rapid PCB prototyping with the same accelerated timeline — combine both for a complete turnkey solution.
Cut weeks from your next prototype cycle — start with a quick-turn quote today.
Request Quick Turn QuoteThree Prototype Bottlenecks We Eliminate for You
Hardware teams lose valuable weeks to avoidable bottlenecks. Our quick turn PCB assembly process is engineered to eliminate these friction points and keep your development on track.
Long Lead Times Stall Your Iteration Cycle
Dedicated rapid-response production lanes
Standard assembly queues treat prototypes and volume runs the same way — your 5-piece order waits behind a 10,000-piece batch. Our facility reserves dedicated quick-turn lines with pre-staged materials and priority scheduling, so your small order moves independently at full speed.
Assembled boards ship in 3–7 days, not 3–4 weeks
DFM Issues Discovered Too Late in Production
Free DFM + DFA review within 2 hours
Catching a tombstoning risk or pad-to-mask misalignment after fabrication wastes your budget and resets the clock. Every quick-turn order includes a complimentary DFM and DFA analysis performed by our process engineers before any material is cut or stencil is made.
Design issues flagged before production — zero-surprise assembly
Juggling Separate PCB and Assembly Vendors
One vendor from bare board to assembled PCBA
Coordinating between a board fabricator and a separate assembler creates handoff delays, finger-pointing on defects, and doubled logistics costs. We handle PCB fabrication, component sourcing, SMT/THT assembly, and testing under one roof — a single PO, one point of contact, one shipment.
Eliminate vendor coordination overhead and save 5–10 days per cycle
Stop losing weeks to avoidable delays — let our engineers review your files today.
Upload Files for Free ReviewQuick Turn PCB Assembly Capabilities
Our facility is equipped to handle a broad range of assembly technologies and component types — from standard 0402 passives to fine-pitch BGA and QFN packages — with rapid turnaround.
Ultra-fine placement capability handles the smallest passive components used in compact wearable and IoT designs.
Fine-pitch BGA and CSP placement with X-ray verified solder joints ensures reliable connections for high-density processors and FPGAs.
Large-format board handling accommodates industrial control panels and backplane assemblies without panel limitations.
High-speed pick-and-place machines maintain throughput even on quick-turn orders, keeping your prototype on schedule.
Fine-grain solder paste options matched to your component pitch deliver clean, void-free joints verified by SPI inspection.
10-zone nitrogen reflow oven supports both SAC305 lead-free and SnPb processes with custom thermal profiling per board design.
Skilled technicians handle through-hole insertion and selective wave soldering for connectors, transformers, and high-power components.
Combined SMT and THT processes on the same board support complex designs that require both surface-mount and through-hole components.
Precision selective soldering targets specific THT joints on mixed boards without disturbing adjacent SMT components or heat-sensitive parts.
Add cable assemblies and wire harnesses to your PCBA order for a ready-to-install module — no additional vendor needed.
Protective conformal coating applied after assembly shields boards operating in harsh, humid, or dusty environments.
Extend your order to include enclosure assembly, labeling, and packaging — receive a market-ready product instead of bare boards.
Already have a working bare board design? Add assembly to your prototype order ↓
Not sure if your design fits our capability range? Send us your files — our engineers will confirm within hours.
Verify Design CompatibilityFrom Upload to Delivery — 7 Steps to Assembled Boards
From the moment you upload your design files to the day your assembled boards arrive, every step of our quick turn PCB assembly workflow is tracked, communicated, and optimized for speed without cutting corners.
Upload Gerber + BOM + Pick-and-Place
Submit your design files through our secure portal. Our system auto-parses your BOM and cross-references component availability in real-time, flagging any long-lead or end-of-life parts before your order enters the queue.
⏱ Instant confirmationFree DFM + DFA Engineering Review
Our process engineers analyze your layout for manufacturability risks — pad dimensions, thermal relief, solder mask clearances, component orientation — and send a detailed report with actionable recommendations within hours.
⏱ Report within 2 hoursComponent Sourcing & Confirmation
Turnkey sourcing from authorized distributors and pre-stocked inventory. Every component is confirmed with datasheets and lot traceability before procurement — no grey-market parts, no surprises during assembly.
⏱ BOM confirmed within 24 hrsStencil Printing → SMT/THT Assembly
Laser-cut stencils apply solder paste with micron-level precision. High-speed pick-and-place machines position every component, followed by nitrogen reflow. THT parts are hand-soldered or selective-wave soldered as needed.
⏱ Assembly complete Day 3–4AOI + X-Ray + Functional Testing
Every board passes automated optical inspection to catch solder defects. BGA and QFN joints are X-ray verified. If you provide test procedures, our technicians run custom functional tests (ICT/FCT) to validate performance.
⏱ Test report includedFinal QC & ESD-Safe Packaging
Boards undergo visual inspection under 10× magnification, cleaning, and ESD-safe vacuum packaging with moisture barrier bags and desiccant. Full traceability documentation is compiled and attached to your shipment.
⏱ Shipment-readyGlobal Express Shipping with Tracking
Boards ship via DHL, FedEx, or UPS express with real-time tracking. We handle all export documentation and customs paperwork, so your assembled prototypes arrive at your door without customs delays or extra fees.
⏱ Delivered to your doorNeed Bare Boards Only? Our PCB fabrication follows the same rapid workflow.
Order bare boards for layout verification first, then add assembly when you're ready — same vendor, same timeline priority. Your prototype journey can start at any stage.
Ready to see how fast your prototypes can be built? Upload your files and get a quote in hours.
Start Your Quick Turn OrderQuick Turn Assembly Lead Times
Every project has a different urgency level. Choose the turnaround tier that matches your development schedule — from 24-hour express prototypes to cost-optimized economy runs — and receive a firm ship date at the time of order confirmation.
PCBA Assembly Turnaround
| Assembly Type | Express (24h–3 days) | Standard (5–7 days) | Economy (10–15 days) |
|---|---|---|---|
| SMT Only (single side) | 24 – 48 hrs Fastest | 5 business days | 10 business days |
| SMT Only (double side) | 48 – 72 hrs | 5 – 6 business days | 10 – 12 business days |
| SMT + THT Mixed | 3 business days | 6 – 7 business days | 12 – 15 business days |
| Full Turnkey (incl. sourcing) | 3 – 5 business days | 7 – 10 business days | 15 – 18 business days |
| BGA / QFN / Fine Pitch | 3 – 4 business days | 6 – 8 business days | 12 – 15 business days |
| Conformal Coating Add-on | +1 day | +1 day | +1 – 2 days |
PCB Fabrication Lead Time (for reference)
If you also need bare boards fabricated, the following lead times apply before assembly begins. Combine both for a complete turnkey solution.
| Board Complexity | Express | Standard | Economy |
|---|---|---|---|
| 1–2 Layer | 24 hrs | 3 – 4 days | 5 – 7 days |
| 4–6 Layer | 48 hrs | 5 – 6 days | 7 – 10 days |
| 8–12 Layer | 3 – 4 days | 7 – 8 days | 10 – 14 days |
| 14+ Layer / HDI | 5 – 7 days | 10 – 12 days | 14 – 20 days |
Tell us your deadline — we'll recommend the right turnaround tier and lock in a guaranteed ship date.
Get a Lead Time EstimateQuick Turn PCB Assembly Lead Time Matrix
Transparent lead times based on board complexity and assembly type — so you can plan your development milestones with confidence and avoid schedule surprises.
| Board Type | Standard Turn | Quick Turn ★ | Rush / Expedite |
|---|---|---|---|
| 1–2 Layer, SMT Only | 10 – 15 days | 3 – 5 days | 24 – 48 hours |
| 4 Layer, SMT Only | 12 – 18 days | 5 – 7 days | 3 – 4 days |
| 6+ Layer, SMT Only | 15 – 22 days | 7 – 10 days | 5 – 7 days |
| Mixed SMT + THT | 15 – 25 days | 7 – 12 days | 5 – 8 days |
| BGA / Fine-Pitch | 18 – 25 days | 8 – 12 days | 6 – 9 days |
| Full Turnkey (incl. sourcing) | 20 – 30 days | 10 – 14 days | 7 – 10 days |
💡 Add PCBA Assembly to Your Bare Board Order
Already ordering bare PCBs from us? Add SMT assembly for just +2–3 extra days, or full turnkey PCBA (including component sourcing) for +3–5 days. Same vendor, one shipment, no coordination overhead.
Need a firm timeline for your specific project? Upload your files and receive an exact schedule within hours.
Get Your Exact Lead TimeChoose the Right Rapid Prototype Package for Your Stage
Whether you need bare boards for layout verification or fully assembled prototypes ready for functional testing, we offer a clear upgrade path — start simple and scale up when you're ready.
Bare Board Prototype
Receive high-quality bare PCBs for routing verification, impedance testing, and mechanical fit checks. The fastest and most cost-effective way to validate your layout before committing to assembly.
- Fastest turnaround — as quick as 24 hours
- No MOQ — order from 1 piece
- Free DFM review included
- Impedance testing & flying probe E-test
- Up to 32 layers, HDI, rigid-flex supported
Starting from $15 for 5 pcs (2-layer, 100×100mm)
Bare Board + SMT Stencil
Get your bare PCBs delivered with a laser-cut SMT stencil, ready for in-house hand assembly. Ideal for teams who have their own reflow capability and want to control the assembly process.
- Includes frameless or framed stencil
- Stencil matched to your Gerber paste layer
- Perfect for in-house prototyping labs
- Save time — no separate stencil vendor needed
- Same rapid PCB turnaround applies
Stencil add-on from $25 (frameless, standard size)
Full Turnkey PCBA Prototype
We handle everything — PCB fabrication, component sourcing from authorized distributors, SMT and THT assembly, AOI/X-ray inspection, and functional testing. You receive fully assembled, tested boards ready for your EVT/DVT phase.
- Complete turnkey — one PO, one vendor
- Sourcing from DigiKey, Mouser, LCSC
- Free DFM + DFA engineering review
- AOI, X-ray, and custom functional testing
- Full traceability documentation included
Assembly from $0.50/pad (turnkey, prototype qty)
Not sure which package fits your project? Tell us your stage and we'll recommend the best path forward.
Get a Custom RecommendationRapid PCBA Prototyping Across Industries
Our rapid-turnaround assembly process serves hardware teams in every sector — from startups iterating on their first EVT build to established OEMs qualifying new product revisions.
IoT & Wearables
Rapid iteration on compact, high-density layouts where every revision cycle directly impacts time-to-market for connected products.
Industrial Controls
Reliable assembly for rugged control boards and automation systems requiring consistent performance in demanding operating environments.
Medical Devices
Precision assembly with full traceability documentation supporting regulatory compliance for diagnostic equipment and patient monitoring systems.
Consumer Electronics
Fast prototype builds for consumer products where tight launch windows demand quick design validation and smooth transition to volume production.
Automotive & EV
Quick-turn prototypes for BMS controllers, ADAS modules, and EV charging systems that must pass rigorous qualification testing cycles.
Military & Defense
Quick-turn military PCB assembly with IPC Class 3 inspection, full lot traceability, and conformal coating for defense electronics requiring the highest reliability standards.
Aerospace & Avionics
Rapid-turnaround aerospace PCB assembly for flight control systems, satellite modules, and avionics boards — built to withstand extreme temperature, vibration, and altitude requirements.
Drones & Robotics
Lightweight, compact PCBA prototypes for flight controllers, sensor fusion boards, and motor drivers requiring frequent design refinement.
Telecom & Networking
High-layer-count, impedance-controlled assemblies for routers, switches, and base station equipment where signal integrity is non-negotiable.
Hardware Startups
Low-MOQ prototype assembly with engineering support that helps first-time hardware founders navigate the journey from breadboard to production-ready PCBA.
Energy & Power
Quick-turn assembly for power supply units, battery management systems, and EV charging controllers — heavy copper boards and high-current designs handled with precision.
Security & Surveillance
Fast-turn PCBA for IP cameras, access control panels, and alarm systems — compact multi-layer boards with integrated wireless modules assembled and tested under one roof.
Whatever your industry, our quick-turn capability adapts to your project requirements.
Tell Us About Your ProjectWhy Engineers Trust Our Quick Turn PCB Assembly
Six concrete reasons why hardware teams across 20+ countries choose our quick turn PCB assembly for their most time-sensitive prototype and pre-production projects.
Factory-Direct Pricing
No trading company markup sits between you and our production floor. Direct access to our engineering and production teams translates to 15–30% cost savings and faster decision-making on your prototype orders.
2-Hour Engineering Response
Every inquiry receives a detailed technical review and quotation within 2 working hours — not 2 days. Our engineers speak your language and provide actionable DFM feedback, not generic templates.
99.7% First-Pass Yield
Rigorous SPI, AOI, and X-ray inspection at every stage ensures your assembled boards work the first time. A 99.7% yield rate means fewer respins, less wasted material, and faster validation cycles.
Multi-Material PCB Support
FR-4, high-Tg, Rogers, aluminum-backed, rigid-flex — our fabrication lines handle diverse substrates with precision impedance control (±5%) and flying probe full-board E-testing on every panel.
Dedicated Project Manager
Every quick-turn order is assigned a single point of contact who tracks your project from file upload to delivery. No bouncing between departments — one person owns your timeline and keeps you updated.
One Vendor, Board to Assembly
Start with bare board prototyping and seamlessly upgrade to full turnkey PCBA — no second vendor search needed. One qualified supplier handles your entire prototype lifecycle under a single purchase order.
See the difference a dedicated quick-turn partner makes — request a quote and experience our responsiveness firsthand.
Request Your Quick QuoteQuality Control Built Into Every Assembly Step
Quick turnaround never means cutting inspection steps. Every board passes through our full QC pipeline — the same rigorous process we apply to volume production — so your prototypes reflect true production quality.
Assembly QC Pipeline
Incoming Material Inspection
Every component lot is verified against datasheets and BOM specifications. Bare boards undergo visual and dimensional checks before entering the assembly line.
Solder Paste Inspection (SPI)
3D SPI measures paste volume, height, and alignment on every pad after stencil printing — catching deposit issues before a single component is placed.
AOI After Reflow
Automated optical inspection scans every solder joint post-reflow for bridges, opens, tombstones, and component polarity errors with sub-micron accuracy.
X-Ray for BGA / QFN
Hidden solder joints under BGA, QFN, and LGA packages are verified by X-ray imaging to detect voids, bridging, and head-in-pillow defects invisible to optical systems.
ICT / Flying Probe Test
In-circuit testing verifies component values, net connectivity, and shorts/opens on every board — catching assembly defects that visual inspection cannot identify.
Functional Test (FCT)
Custom functional testing based on your test procedures validates that the assembled board performs to specification under real operating conditions.
Visual Final Inspection
Trained inspectors perform 10× magnification visual inspection checking for cosmetic defects, marking accuracy, and cleanliness before packaging.
Traceability & Documentation
Complete lot traceability with inspection reports, test data, and component certificates compiled and delivered with your shipment for audit-ready records.
Inner Layer AOI
Automated inspection of inner-layer trace patterns before lamination to catch opens and shorts early.
Lamination X-Ray
X-ray alignment verification ensures precise layer registration on multi-layer stack-ups.
Outer Layer AOI
Post-etch inspection of outer copper layers for trace width, spacing, and pad integrity.
Impedance & E-Test
Flying probe testing on every board plus TDR impedance measurement for controlled-impedance designs.
Quality you can trust on every prototype build — request a sample or review our inspection reports.
Request a Quality SampleQuick Turn PCB Assembly FAQ
Answers to the most common questions about our rapid-turnaround PCBA services — from minimum order quantities to component sourcing and testing options.
There is no minimum order quantity. We accept orders starting from 1 piece — ideal for early-stage prototyping, proof-of-concept validation, and engineering samples. Most quick-turn customers order between 5 and 50 pieces for their EVT or DVT builds.
Our fastest turnaround is 24–48 hours for simple 1–2 layer SMT-only boards with readily available components. Standard quick-turn orders ship in 3–7 business days including PCB fabrication, component sourcing, assembly, and testing. Full turnkey orders with complex BOM sourcing typically complete in 7–14 days.
We offer both options. For turnkey orders, we source all components from authorized distributors like DigiKey, Mouser, and LCSC with full lot traceability. You can also supply your own components (consigned) or use a combination (partial turnkey) where we source common parts and you provide specialized or custom components.
For a complete quote, please provide your Gerber files (or ODB++ / IPC-2581), a Bill of Materials (BOM) in Excel format with manufacturer part numbers, and a pick-and-place / centroid file. If you have special testing requirements, include your test procedure document. We also provide a BOM template you can download from our portal to speed up the quoting process.
Every quick-turn order includes solder paste inspection (SPI), automated optical inspection (AOI), and visual final inspection at no extra cost. X-ray inspection is included for boards with BGA, QFN, or other hidden-joint packages. We also offer custom functional testing (ICT/FCT) if you provide your test procedures and fixtures — or we can design a fixture for you.
Yes. Our high-speed pick-and-place machines handle components down to 01005 (0.4mm × 0.2mm) and BGA packages with 0.3mm pitch. All fine-pitch BGA assemblies undergo mandatory X-ray inspection to verify solder joint quality, and we use Type 4 or Type 5 solder paste matched to your component pitch for optimal printing results.
Yes — full turnkey PCBA is one of our core services. We handle component sourcing, SMT/THT assembly, inspection, and testing. Adding assembly to a bare board order typically adds 2–3 days for SMT-only builds and 3–5 days for full turnkey including component sourcing. It's the fastest way to go from design files to functional hardware.
It depends on your development stage. If this is your first revision and you want to verify routing, impedance, and mechanical fit, ordering bare boards first is the most cost-effective approach. If your layout is already validated and you need functional prototypes for firmware development or system integration, going straight to PCBA saves time. Our team can help you decide — contact us with your project details and we'll recommend the best path forward.
Yes. Upload your Gerber and BOM files through our portal and receive an itemized turnkey PCB assembly quote within 2 hours. Our system auto-checks component availability and flags any long-lead parts immediately, so you get an accurate price and timeline without back-and-forth emails.
Yes. We assemble boards for military and aerospace applications with IPC Class 3 inspection standards, full component traceability, and conformal coating options. Our quick-turn capability applies to these high-reliability builds as well — typical turnaround is 5–7 days for mil-spec assemblies with kitted components.
Absolutely. When you order PCB fabrication and assembly together, we overlap production stages internally — your stencil is cut while boards are still in fabrication, and components ship to our warehouse in parallel. This saves 2–3 days compared to ordering from separate vendors.
Still have questions? Our engineering team is ready to help — reach out anytime.
Ask Our Engineering TeamStart Your Rapid PCB Assembly Project
Upload your design files and tell us about your project. Our engineering team will review your requirements and deliver a detailed quote with exact pricing and lead time — typically within 2 working hours.
- Free DFM + DFA engineering review
- Detailed quote with itemized pricing
- Exact lead time based on your BOM
- Component availability check included
- No obligation — no hidden fees
Email: [email protected]
Response: Within 2 working hours
Request a Quick Quote
Fill out the details below and we'll get back to you within hours.